| 898 | 19 | 59 |
| 下载次数 | 被引频次 | 阅读次数 |
通过分析注塑机液压系统的工作过程,设计了基于PLC的电气控制系统,设计包括硬件和软件设计.采用先进的顺序控制设计法进行程序设计,在画出顺序功能图SFC的基础上,利用通用的PLC编程元件及起保停电路的编程方式进行模块化编程,程序具有简洁明了、调试简单、修改容易、通用性强的优点,适用于任意型号的PLC.实践表明:采用PLC改造的电气控制系统大大提高了注塑机的工作性能和稳定性,提升了注塑产品的质量和生产效率,且系统维护方便.
Abstract：The working principle about hydraulic system of injection molding machine and the working requirement are introduced,then the electrical control system including hardware and program based on the PLC is designed.The programming way of Start-Retention-Stop Electric Circuit to modular programming is employed.After drawing sequential function chart,modularized programming is achieved by using PLC programming components,therefore the program is concise,simple debugging,easy to modify,and has strong versatility,which is suitable for any type of PLC.The finding shows that:the modified electrical control system can greatly improve the production precision,working performance,maintenance and stability of injection molding machine,improve the quality and production efficiency of the products.
[1]王雷刚,倪雪峰,黄瑶,等.微注射成型技术的发展现状与展望[J].现代塑料加工应用,2007,19(1):55-58.
[2]金波,宁德胜,许明,等.注塑机控制系统的现状及发展趋势[J].液压气动与密封,2006(1):7-10.
[3]魏晓晴,吴旭光,白晓娟,等.注塑机嵌入式控制系统图形界面的设计与实现[J].制造业自动化,2011,33(8):139-142.
[4]马丽萍.基于PLC的干燥箱温度控制系统[J].轻工机械,2011,29(4):51-53.
[5]王兰军.基于状态编程思想的PLC编程的新方法[J].机电工程技术,2006,35(8):69-71.
基本信息:
DOI：
中图分类号:TP273
引用信息:
[1]李青虹,吴龙.基于PLC的注塑机液压系统的控制设计[J].南通大学学报(自然科学版),2011,10(04):22-25.
基金信息:
福建省高校服务海西建设重点工程资助项目(HX200804)