| 118 | 3 | 35 |
| 下载次数 | 被引频次 | 阅读次数 |
以分动器传动性能、经济性能和冷却润滑性能分析为基础,采用层次分析法对不同设计因素的权重进行分析,建立3个关于灰度三角白化权函数的性能指标,计算3种不同性能关于灰度k的综合聚类系数,对分动器的设计方案进行评价。进而针对分动器评价较差的润滑性能进行台架实验,通过对分动器加挡油板处理实现设计方案改进,使分动器润滑性能得到进一步提高,从而完成分动器设计方案评价体系建设,该评价体系对于产品设计有一定的指导意义。
Abstract：On the basis of analysis of the transmission performance,economy,cooling and lubrication performance,different weights of different design factors are analyzed with analytic hierarchy process (AHP) to establish three triangle whiten function on gray with different performance indicators,and then their integrated clustering coefficient k is calculated for the evaluation of designs of the transfer case.Bench test is carried out for its poor lubrication performance evaluation and oil block board is installed for the flow of oil to further improve the lubrication performance of the transfer case evaluation to excellence.Thus an evaluation system is established with which transfer case design can be evaluated accurately;it has some significant value for product design.
[1] 郭立书,葛安林,张泰,等.电子控制最佳扭矩分配4WD系统研究[J].农业机械学报,2002,33(6):16-19.
[2] ANDO H,MURAKAMI T.AWD vehicle simulation with the intelligent torque controlled coupling as a fully controllable AWD system[C]//SAE Technical Paper Series,400 Commonwealth Drive,Warrendale,PA,United States:SAE International,2005.
[3] KOPP T,PRITCHARD L A.Beyond driveline disconnect-the ultimate on-demand dry sump RDM system with PTU disconnect[C]//SAE Technical Paper Series,400 Commonwealth Drive,Warrendale,PA,United States:SAE International,2015.
[4] POST B,KANG X D,KLAUS T.The influence of direct yaw control AWD systems on vehicle stability and response in all driving conditions[J].SAE International Journal of Passenger Cars-Mechanical Systems,2008,1(1):504-513.
[5] 沈强,姚炎明,何勇.基于灰色多层次综合评判模型的生物质能开发方案优选[J].农业工程学报,2012,28 (17):179-185.
[6] 刘春景,唐敦兵,何华,等.基于灰色关联和主成分分析的车削加工多目标优化[J].农业机械学报,2013,44 (4):293-298.
[7] 楼锡银.基于灰色关联的机械总体设计方案模糊优选[J].农业工程学报,2010,26(6):135-140.
[8] 崔巍,张梅.基于灰色理论与BP网络的负荷预测[J].辽宁工程技术大学学报(自然科学版),2011,30(4):631-633.
[9] 谢延敏,王新宝,王智,等.基于灰色理论和GA-BP的拉延筋参数反求[J].机械工程学报,2013,49(4):44-50.
[10] 黄少先,徐松林.基于GIS与灰色聚类评估模型的变电站选址[J].电力系统保护与控制,2011,39(24):84-89.
[11] 余天明,郑磊,李颂.电控机械式自动变速器离合器灰色预测PID控制技术[J].农业机械学报,2011,42 (8):1-6.
[12] 赵茂俞,薛克敏,李萍.基于灰色系统理论的铝合金覆盖件成形优化模拟[J].农业机械学报,2008,39(10):207-210.
[13] HUANG S J,CHIU N H,CHEN L W.Integration of the grey relational analysis with genetic algorithm for software effort estimation[J].European Journal of Operational Research,2008,188(3):898-909.
[14] KARMAKAR S,MUJUMDAR P P.A two-phase grey fuzzy optimization approach for water quality management of a river system[J].Advances in Water Resources,2007,30(5):1218-1235.
[15] 黄继,种晓丽.广义累加灰色预测控制模型及其优化算法[J].系统工程理论与实践,2009,29(6):147-156.
[16] 谢延敏,于沪平,陈军,等.基于灰色系统理论的方盒件拉深稳健设计[J].机械工程学报,2007,43(3):54-59.
[17] 张毅,杨建国.基于灰色理论预处理的神经网络机床热误差建模[J].机械工程学报,2011,47(7):134-139.
[18] 刘俊娟,王炜,程琳.基于梯形白化权函数的信号交叉口服务水平评价[J].交通运输工程学报,2009,9(2):121-126.
基本信息:
DOI：
中图分类号:U463.2
引用信息:
[1]王钰明,李洪亮,顾添翼等.基于中心点三角白化权函数的分动器设计方案评价[J],2019,18(03):29-33+75.
基金信息:
江苏省高校自然科学基金项目(16KJB580006);; 南通市科技计划项目(MS12018100);; 江苏省大学生创新训练计划项目