| 135 | 1 | 43 |
| 下载次数 | 被引频次 | 阅读次数 |
对比分析国内传统液压回路系统和国外新型液压伺服系统,探讨国外新型液压伺服系统的节能特点.新型液压伺服系统通过消除液压系统不动作时的能量消耗和减少动作时的能量消耗来实现系统的节能,并在搭载上述两种液压系统的注塑机上对两种塑料制品进行加工试验,通过试验对理论分析结果加以验证.结果表明,国外新型液压伺服系统的节能率均高于国内传统液压系统50%以上,降低能耗效果明显.
Abstract：The differences between domestic conventional hydraulic circuit system and foreign new hydraulic servo system was analyzed,and the energy saving feature of foreign new hydraulic servo system was explored.New hydraulic servo system realized the energy-saving by eliminating the energy consumption when the system wasn't working and reducing the energy consumption when the system was working.The theoretical analysis result was verified by manufacturing two kinds of plastic products on injection molding machine with both hydraulic system above.The results shows that foreign new hydraulic saves 50% energy more than domestic conventional hydraulic system,and the reduced energy consumption is significant.
[1]彭根运,袁银男,陶建峰,等.阀泵联合控制压机主液压缸系统建模与仿真[J].机床与液压,2011,39(13):100-102.
[2]喜冠南,彭根运颜国义,等.电控比例液压泵控通用液压机开环实验研究[J].液压与传动,2011(7):65-67.
[3]周孚宏.注塑机的变频节能改造[J].电气传动自动化,2006,28(5):37-41.
[4]林克伟,徐开杰,周才根.注塑机液压系统节能技术的现状分析[J].工程塑料应用,2011,39(8):84-87.
[5]张涛,李斌礼,李子玉.基于液压泵伺服驱动的注塑机节能技术研究[J].机电工程技术,2010,39(8):74-75.
[6]李青虹,吴龙.基于PLC的注塑机液压系统的控制设计[J].南通大学学报:自然科学版,2011,10(4):22-25.
[7]王敏.注塑机节能改造的趋向[J].塑料助剂,2007(4):54-55.
[8]张佳林.基于能量调节的注塑机节能液压系统研究[D].杭州:浙江大学机械工程学系,2010.
[9]张友根.注塑机节能液压动力驱动系统的应用分析研究[J].液压气动与密封,2008,28(3):1-5.
基本信息:
DOI：
中图分类号:TQ320.5
引用信息:
[1]孙苗,张炜,焦玉全等.基于两种不同液压系统的注塑机能耗研究[J],2013,12(04):39-41+56.
基金信息:
江苏省科技支撑计划项目(BE2011116);; 南通市传热强化与过程节能重点实验室项目(CP12012004);; 南通大学研究生科技创新计划项目(YKC12060)