| 189 | 1 | 574 |
| 下载次数 | 被引频次 | 阅读次数 |
纳米纤维纱线的制备一直面临着力学性能较弱和性能利用不完全的问题。针对上述问题，采用自制多针头水浴静电纺丝设备制备皮芯结构纳米纤维包芯纱，考察了电压对多针头静电纺丝工艺的影响。通过有限元分析软件ANSYS模拟其电场分布，分析多针头情况下的电场分布情况，以探究多针头产生多电场的协同作用及不同电压下纳米纤维包覆层的结构。对纳米纤维包芯纱的形态结构、孔隙率、包覆比、结晶性能和力学性能等进行分析测试。结果表明：多针头水浴静电纺丝技术可以制备具有良好皮芯结构的纳米纤维包芯纱；皮层纳米纤维的直径随着电压的增大呈先减小再增大的趋势，当电压为24 kV时，纳米纤维的平均直径达到最小值（101.42±17.25） nm，且得到的纳米纤维包覆层具有最好的力学性能（断裂强力为（12.99±1.33） cN）；结晶度随着电压的增大呈先增后减的趋势，当电压为26 kV时，纳米纤维包覆层的结晶度达到最大值16.45%。
Abstract：The preparation of nanofiber yarns has been challenged by weak mechanical properties and incomplete utilization of their potential. To address these issues, the influence of voltage on the multi-needle electrospinning process was investigated, and a custom-built multi-needle water bath electrospinning device was employed to prepare skincore nanofiber-coated yarns. Finite element analysis software(ANSYS) was used to simulate and analyze the electric field distribution generated by multiple needles, exploring the synergistic effects of multiple electric fields and the structure of nanofiber coating layers under different voltages. The morphology, porosity, coating ratio, crystallinity, and mechanical properties of the nanofiber-coated yarns were analyzed and tested. The results show that multi-needle water bath electrospinning technology can produce nanofiber-coated yarns with a well-defined skin-core structure. The diameter of the cortical nanofibers first decreases and then increases with increasing voltage. At 24 kV, the average diameter of the nanofibers reaches a minimum value of(101.42 ± 17.25) nm, and the resulting nanofiber coating exhibits optimal mechanical properties with a breaking strength of(12.99 ± 1.33) cN. The crystallinity of the nanofiber coating increases initially and then decreases with increasing voltage, reaching a maximum value of 16.45% at 26 kV.
[1] BOGNITZKI M, CZADO W, FRESE T, et al. Nanostructured fibers via electrospinning[J]. Advanced Materials,2001, 13(1):70-72.
[2] TANG C Y, LIU Z R, HU Q H, et al. Unconstrained piezoelectric vascular electronics for wireless monitoring of hemodynamics and cardiovascular health[J]. Small, 2024,20(3):2304752.
[3] EL-ASWAR E I, RAMADAN H, ELKIK H, et al. A comprehensive review on preparation, func tionalization and recent applications of nanofiber membranes in wastewater treatment[J]. Journal of Environmental Management,2022, 301:113908.
[4] BAHSI KAYA G, KIM Y, CALLAHAN K, et al. Microencapsulated phase change material via Pickering emulsion stabilized by cellulose nanofibrils for thermal energy storage[J]. Carbohydrate Polymers, 2022, 276:118745.
[5] MOKHTARI F, SPINKS G M, FAY C, et al. Wearable electronic textiles from nanostructured piezoelectric fibers[J]. Advanced Materials Technologies, 2020, 5(4):1900900.
[6] XUE J, SONG J Z, DONG Y H, et al. Nanowire-based transparent conductors for flexible electronics and optoelectronics[J]. Science Bulletin, 2017, 62(2):143-156.
[7] JI D X, LIN Y G, GUO X Y, et al. Electrospinning of nanofibres[J]. Nature Reviews Methods Primers, 2024, 4:1.
[8] TSAI P P, SCHREUDER-GIBSON H, GIBSON P. Different electrostatic methods for making electret filters[J]. Journal of Electrostatics, 2002, 54(3/4):333-341.
[9] XIONG J, LIU Y, LI A L, et al. Mass production of highquality nanofibers via constructing pre-Taylor cones with high curvature on needleless electrospinning[J]. Materials&Design, 2021, 197:109247.
[10] LEE J H, LEE J, UNNITHAN A R, et al. Design and development of a cylinder type electrospinning device for the mass production of nanofibers[J]. Journal of Nanoscience and Nanotechnology, 2017, 17(6):3982-3986.
[11] WEI L, QIN X H. Nanofiber bundles and nanofiber yarn device and their mechanical properties:a review[J]. Textile Research Journal, 2016, 86(17):1885-1898.
[12]胡铖烨，周歆如，范梦晶，等.皮芯结构微纳米纤维复合纱线的制备及其性能[J].纺织学报，2022, 43(9):95-100.HU C Y, ZHOU X R, FAN M J, et al. Prepara tion and properties of skin-core structure micro/nano fiber composite yarns[J]. Journal of Textile Research, 2022, 43(9):95-100.(in Chinese)
[13] VARESANO A, CARLETTO R A, MAZ ZUCHETTI G.Experimental investigations on the multi-jet electrospinning process[J]. Journal of Materials Processing Technology,2009, 209(11):5178-5185.
[14] GUPTA A, AYITHAPU P, SINGHAL R. Study of the electric field distribution of various electrospinning geometries and its effect on the resultant nanofibers using finite element simulation[J]. Chemical Engineering Science, 2021,235:116463.
[15] SALEHHUDIN H S, MOHAMAD E N, AFIFI A M, et al.Simulation and experimental study of parameters in multiple-nozzle electrospinning:effects of voltage and nozzle configuration on the electric field and electrospun jet attributes[J]. Journal of Manufacturing Processes, 2023, 85:544-555.
[16] FAN M J, YUE X Y, WANG X H, et al. Electric field simulation of multi-needle water bath electrospinning and the structural properties of SCN/PAN micro/nanofiber composite yarns[J]. Nanotechnology, 2023, 34(50):505702.
[17]周歆如，范梦晶，岳欣琰，等.导电微纳纤维复合纱的制备及其气敏特性[J].纺织学报，2024, 45(2):52-58.ZHOU X R, FAN M J, YUE X Y, et al. Preparation of conductive micro-nano fiber composite yarns and their gas-sensitive properties[J]. Journal of Textile Research,2024, 45(2):52-58.(in Chinese)
[18] BRANDRUP J, IMMERGUT E H, GRULKE E A, et al.Polymer handbook[M]. New York:Wiley, 1999.
[19]王丹，单小红，潘江贵. Photoshop和Matlab软件在纳米纤维膜孔隙率测试中的应用[J].产业用纺织品，2016,34(6):41-44.WANG D, SHAN X H, PAN J G. Application of Photoshop and Matlab software on porosity test of nanofibers mat[J]. Technical Textiles, 2016, 34(6):41-44.(in Chinese)
[20]胡铖烨.基于水浴静电纺丝的PA6纳米纤维包芯纱高效制备与产品开发[D].绍兴：绍兴文理学院，2022.HU C Y. High efficiency preparation and produtc development of PA6 nanofiber core-spun yarn based on water bath electrospinning[D]. Shaoxing:Shaoxing University,2022.(in Chinese)
[21] LIU Z, JU K Y, WANG Z Q, et al. Electrospun jets number and nanofiber morphology effected by voltage value:numerical simulation and experimental verification[J].Nanoscale Research Letters, 2019, 14(1):310.
基本信息:
DOI：10.12194/j.ntu.20240320001
中图分类号:TQ340.64;TB383.1
引用信息:
[1]王小虎,周歆如,岳欣琰,等.多针头水浴静电纺电场模拟及电压对纳米纤维包芯纱结构的影响[J].南通大学学报(自然科学版),2024,23(02):30-38.DOI:10.12194/j.ntu.20240320001.
基金信息:
浙江省自然科学基金探索公益项目（LTGY24E030001）; 绍兴市柯桥区产业关键技术攻关项目（2023JBGS110）
2024-03-20
2024
2024-04-29
2024
1
2024-05-08
2024-05-08
2024-05-08