| 127 | 8 | 27 |
| 下载次数 | 被引频次 | 阅读次数 |
为探讨如何提高大型集体逃生舱的上浮安全性并优化大型集体逃生舱设计方案,对3种典型顶部设计(胶囊体、圆柱体、菱形体)的逃生舱模型,运用Fluent软件对其上浮状态进行了仿真模拟,计算得出各方案逃生舱上浮过程中的最大速度,比较了不同顶部设计方案的优缺点.结果表明,针对大型集体逃生舱,3种典型顶部设计不能达到安全上浮标准,还需结合其他减速手段.
Abstract：In order to discuss how to improve the safety of large-sign escape capsule and optimize the design scheme of large-sign escape capsule, the escape capsules model with different top design was proposed in this paper, and the Fluent software was used to simulate the floating state of each design, and the maximum floating velocity of escape capsule with different top design of the submarine was calculated, the advantages and disadvantages of different top design schemes were analyzed and compared. The results showed that the designs proposed can not reach the standard of safe ascent, and it should be combined with other methods.
[1]张万波,汪新宇,劳健锋.潜艇逃生和营救技术现状与发展[J].船海工程,2001(5):19-24.
[2]陈黎俊,于浩.美国战略核潜艇新型水面救援舱概念设计[J].舰船科学技术,2014,36(11):181-184.
[3]LAPENNA J J.Surfacing rescue container concept design for trident submarines:rethinking submarine search and rescue[J].Naval Engineers Journal,2010,122(1):93-109.
[4]徐萌萌,宋志平,刘晓娜,等.一种浮体自由上浮运动过程的测量与研究[C]//船舶力学委员会测试技术学组2016学术会议论文集,2016:393-399.
[5]简要军.水下平台的六自由度建模与仿真[D].西安:西北工业大学,2003.
[6]袁绪龙,张宇文,殷崇一,等.无动力潜射导弹运载器出水弹道建模与实验验证[J].弹箭与制导学报,2003,23(4):187-189.
[7]黄景泉,张宇文.鱼雷流体力学[M].西安:西北工业大学出版社,1989.
[8]唐鑫,黄祥兵,黄兴玲.多尺度的潜艇集体逃生舱运动过程数值模拟[J].中国舰船研究,2014,9(4):25-29.
[9]黄祥兵,黄兴玲,董云飞.潜艇集体逃生舱上浮水动力性能[J].海军工程大学学报,2013,25(3):78-81.
[10]江帆,黄鹂.Fluent高级应用与实例分析[M].北京:清华大学出版社,2008.
[11]王福军.计算流体动力学分析[M].北京:清华大学出版社,2004.
基本信息:
DOI：
中图分类号:U674.76
引用信息:
[1]孙济政,黄祥兵.潜艇大型集体逃生舱上浮数值模拟研究[J].南通大学学报(自然科学版),2017,16(02):21-25.
基金信息: